Customer Care : +91-9041447864

  • image

    Call Us +91-172-4003572

  • image

    Mail Us

Abrol Solar Products


ABROL  All-in-one Integrated  SOLAR LED STREET LIGHT

8w, 12w, 15w, 20w, 30w, 40w, 50w, 60w, 80w, 100w, 120w
Solar panel IP65 Waterproof integrated led street light
Solar Street Light Integrated ; All in one type

1. The Advantages of our Solar Power Led Street Light:

All in one integrated Design (Put solar panel, LED lamp, lithium battery, and controller together);
Very easy to install and transport;
Very long lifespan: more than 50,000 hours;
Green energy, eco-friendly: Solar Energy, no pollution and no harm.
Resist any Bad Weather Condition and Working Temperature Range from -30°C to 60°C. 

ll In One Solar Street Light integrates the green-energy parts solar panel, LED lamp and the lithium battery into a single product, is with human intelligence induction system to gain the solution of low-energy, long-time,high-luminance and free maintenance. And the same time, it’s convenient in the shipment and installation.

Where to install:
To be installed in the garden, residential area, courtyard, road, main area, parking area or provide the light in roads where it’s necessary, the battery provide the energy for lighting, and the solar panel charge for the battery.

 Our Integrated Solar LED Street Lights Have the Best Design with Simple Shape,Easy for Transportation and Installation.

ABROL  Energy Saving 12W Outdoor Solar Waterproof Led Garden Light

The Advantages of our Solar Power Led Street Light:

1.All in one integrated Design (Put solar panel, LED lamp, lithium battery, and controller together);
2.Very Easy to install and transport;
3.Very long lifespan: more than 50,000 hours;
4.Green energy, eco-friendly: Solar Energy, no pollution and no harm.
5.Resist any Bad Weather Condition and Working Temperature Range from -30°C to 60°C.

Product specifications

 Model No. ABSL-12W
Lamp Power 12W
Solar panel 25W(Mono)) 18v
Human body sensing Yes
Dimension(MM) 550*320*55mm
Luminous flux(Full load) 1300lm
Luminous flux(less load) 1000m
Light efficiency 100-110lm/W
Light source Bridgelux 
Charging by sun 6-7 hours
Work time Full power ≥ 40hr
Saving mode ≥ 50hr
Material High quality die-casting aluminum alloy
Rated life ≥50000hours
Color temperature 2700K-7000K
Working temperature -30~+60°C
Visual angle 120°
IP code IP65
Warranty 2 years
Certificate CE, ROHS
Application garden, courtyard, road, outdoor, etc.
Install height 3-4M



Non-pressurized solar water heater without assistant tank

How solar water heater system works
1. Solar water heater system of all glass evacuated tube collector integrated with storage tank, are ideal for use in houses and other applications where cheap, reliable hot water supply is required. They are simple, economic and practical.

2. As the specific gravities of hot water and cold water are different, cold water goes downward and hot water goes upward.

3. When cold water in evacuated tubes is heated, it becomes lighter and goes to the water tank, while cold water the tank goes down to the evacuated tubes

4. Through this circulation, the cold water in the water tank will be gradually heated.

Solar Water Heater System Features:

1. Cheap and reliable solution, Simple structure, Easy installation
2. Withstands water pressure no more than 0.1MPa
3. Electric heater can be used as back up in rainy days
4. Hot water can be used directly, or can be used as a pre-heated

Working Principle:

This type uses all-glasses evacuated tubes as the solar collector for absorbing solar energy and transferring it into heat energy. As the different densities of hot water and cold water, the hot water flows automatically upwards while the cold water flows down. The water flowing cycle is created in the tube. And the water in the storage tank is heated from this natural circulation. The hot water pressure of this non-pressure system is from the gravity, so it should be installed on the roof or at least 3-4 meters higher than hot water tap. Or you can install a booster pump to get stronger outlet hot water

Non-pressure solar water heater specification:

Prescription Non-pressure solar water heater
Material of out tank 0.31-0.4mm color steel/fluorine carbon steel
Material of inner tank Food grade 0.31-0.4mmSUS304 Stainless Steel
Tank insulating layer 55mmhigh-density polyurethane foamed
Inlet and outlet hole Male G 1/2, 3/4
Solar collector tube 3.3 Borosilicate glass with N/Al coating
Thickness of glass tube 1.6mm
Vacuum tube tightness P≤0.005 Pa
Bracket: 1.5mm thickness Galvanized Steel
Structure of tank: 4 holes for air vent,overflow,water inlet and outlet,electric heater

ABROL Power SystemOn Gride & Off Grid

ABROL Portable SolarLight & Charger kit

Working Process of Solar Street  Light